40″ x 48″ Order Picking Platform with Three-Sided Rails and Kick Plate | 1,500 lb Capacity

The Z24-007-325 is a 40 inch by 48 inch order picking platform built to carry pallets and boxes of electrical supplies through distribution operations. Rated for 1,500 lbs, it gives a picker a stable surface to work loads directly on the platform level.

Three-sided rails with a cross member keep product from sliding off during picking, and a kick plate adds a low barrier at floor level to stop boxes from working their way off the edge.

Specifications

• Model Z24-007-325
• 40″ W x 48″ L
• 1,500 lb capacity
• Steel construction
• Steering type: none
• Three-sided rails with a cross member
• Kick plate

Electrical Equipment and Supply Distribution Applications

• Order picking pallets and boxes of electrical supplies at height
• Staging mixed product loads for outbound orders
• Containing loose boxes with rail and kick plate protection during picking runs
• Moving picked orders from the pick face to a staging or shipping area

Picking at height means a product falling off the platform edge is a real risk to both the load and the picker below. Three-sided rails and a kick plate keep boxes contained instead of walking off during a pick run.

Other Ways to Use This Order Picking Platform

• Order picking in any distribution environment moving mixed pallet and carton loads
• Staging product ahead of loading or shipping
• Holding boxed inventory during cycle counting or put-away
• General elevated picking work where rail containment is needed

Facility Notes

• No steering, built for straightforward platform positioning rather than active towing
• Three-sided rails and a kick plate contain loose boxes at both platform level and floor level

Why Choose Nutting Carts & Trailers

This platform’s rail and kick plate layout was built for how your pickers actually load it, not a generic guard rail. If you need a different rail height or containment setup, we build it that way.

This configuration is ready to build exactly as specified here, or we can adjust the dimensions, material, or features to fit your operation.

Nutting has been engineering carts and trailers for over 130 years, since 1891. Every unit is built in the USA to hold up to daily, high-cycle use.

It’s built to work with the order picker, forklift, or tugger already running your distribution floor, no special adapters needed.

If you’re speccing an order picking platform for your distribution center, contact our team and we’ll build to your pick process.