54″ x 105″ Steel Dump Bin | 2,000 lb Capacity

The Z24-007-321 is a 54 inch by 105 inch steel dump bin built to collect and clear waste in consumer goods production and packaging environments. Rated for 2,000 lbs, it’s built to take repeated loading without denting, cracking, or losing shape.

This bin is designed to pair with an independent dumping machine. It gets positioned, filled, and mechanically tipped by that separate unit, no manual lifting or hand tipping required.

That pairing keeps waste handling consistent on the line instead of leaving it to whoever’s free to muscle a full bin to the dumpster.

Specifications

• Model Z24-007-321
• 54″ W x 105″ L
• 2,000 lb capacity
• Steel construction
• Built to pair with an independent dumping machine

Consumer Goods Applications

• Collecting production line scrap and packaging waste
• Staging garbage ahead of scheduled pickup or compaction
• Positioned at pack-out, trim, or fill stations where waste volume is constant
• Paired with a dedicated tipping or dumping machine for hands-free unloading

Waste volume in a consumer goods plant doesn’t stop for anyone. A bin sized to the machine that empties it keeps that waste moving without pulling an operator off the line to deal with it.

Other Ways to Use This Dump Bin

• Collecting metal shavings, trim, or reject product in fabrication areas
• Holding cardboard, film, or packaging scrap ahead of baling
• Staging returns or damaged goods pending disposition
• General scrap collection anywhere a mechanical tipper is already on site

Facility Notes

• Sized to match the reach and tipping angle of the dumping machine it pairs with
• Steel construction holds up to sharp or heavy scrap without deforming
• Confirm bin height and lip clearance against your dumping equipment before ordering for a clean fit

Why Choose Nutting Carts & Trailers

This bin was sized to match a specific dumping machine, not pulled off a shelf. If your equipment needs a different bin height, lip angle, or reinforcement, we build to that spec, not a stock size that’s close enough.

This configuration is ready to build exactly as specified here, or we can adjust the dimensions, material, or features to fit your operation.

Nutting has been engineering carts and trailers for over 130 years, since 1891. Every unit is built in the USA to hold up to daily, high-cycle use.

This bin is built to interface with the specific tipping or dumping equipment already running on your line, no adapters or workarounds needed.

If you’re speccing a dump bin for your facility, contact our team with your dumping equipment’s dimensions and we’ll build to fit.